Mechanical Engineering - Publication Details
| Sr. No | Name of Faculty | Publication Details |
| 1 | Dr. Umang Parmar | R. Shah, D. Shah, N. Panchal, K. Bhavsar, U. Parmar, and P. Bhatt, “A comparative study of kinematic analysis between conventional Theo Jansen mechanism and modified Theo Jansen mechanism developed using ABS for the development of spyder robot,” Materials Today: Proceedings, vol. 72, pp. 918–926, 2023, doi: 10.1016/j.matpr.2022.09.091. |
| 2 | Dr. Umang Parmar | R. Shah, K. Bhavsar, D. Patel, D. Shah, U. Parmar, and P. Bhatt, “Advancement and application of Theo Jansen linkages: A review,” Ranchi, India, 2023, p. 090020. doi: 10.1063/5.0169581. |
| 3 | Dr. Umang Parmar | Neel Bharadia, Smit Panchasara, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Study of Modified Jansen Linkage for Development of a Hexapod Robot", Proceedngs of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 4 | Dr. Umang Parmar | Ajay Yadav, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Optimization of 3D Printing Process Parameters using Design of Experiments for ABS Material", Proceedngs of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 5 | Dr. Umang Parmar | Smit Panchasara, Neel Bharadia, Jyotin Gajjar, Pratik Barot, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Analysis based Comparative Study and Development of Modified Theo Jansen Linkage", Proceedings of Indian Society of Theoretical and Applied Mechanics (ISTAM) 2022 |
| 6 | Dr. Umang Parmar | Rushil Shah, Dhruvin Patel, Pratik Barot, Keval Bhavsar, Umang Parmar, Pina Bhatt, "The Optimization of 3D Printing Process Parameters and Their Influence on Part Characteristic", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 7 | Dr. Umang Parmar | Rushil Shah, Keval Bhavsar, Dhruvin Patel, Devansh Shah, Umang Parmar, Pina Bhatt, "Advancement and Application of Theo Jansen Linkages: A Review", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 8 | Dr. Umang Parmar | Pranav Darji, Keval Bhavsar, Dharmik Gohel, Jitendra Modi, Umang Parmar, "Comparison of Kinematic Analysis of Robot Based on Conventional Theo Jansen Mechanism and Modified Theo Jansen Mechanism Made of Mild Steel", Proceedings of International Conference on Innovations in Mechanical Engineering (ICIME 2021) |
| 9 | Dr. Umang Parmar | Mit Shah, Pina Bhatt, Keval Bhavsar and Umang Parmar, "Identification of Faults for Centrifugal Pump using Wavelet Analysis with Machine Learning Classifiers", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 10 | Dr. Umang Parmar | Rahulkumar Parmar, Yashwantkumar Parmar, Dhruvi Shrimali, Keval Bhavsar and Umang Parmar, "Drone Detection and Tracking using Electro Optics", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 11 | Dr. Umang Parmar | Dhruvi Shrimali, Swapnil Vegad, Keval Bhavsar and Umang Parmar, "Fault Identification for Permanent Magnet Synchronous Generators of Wind Turbines by Wavelet Signal Processing with Machine Learning Classification Algorithms", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 12 | Dr. Umang Parmar | Swapnil Vegad, Jaimin Panchal, Keval Bhavsar, Umang Parmar, "Identification of Faults in Ball Bearing using Maximum Overlap Discrete Wavelet Transform and Mutual Information", Proceedings of International Conference on Recent Advances in Mechanical Infrastructure 2022 |
| 13 | Dr. Umang Parmar | K. Bhavsar, P. Darji, D. Gohel, J. Modi, and U. Parmar, “Comparison of Kinematic Analysis of Robot Made of Conventional Theo Jansen Mechanism, Modified Theo Jansen Mechanism of PLA and Modified Theo Jansen Mechanism of Mild Steel,” in Recent Trends in Mechanical Engineering, G. S. V. L. Narasimham, A. V. Babu, S. S. Reddy, and R. Dhanasekaran, Eds., Singapore: Springer Singapore, 2021, pp. 545–559. doi: 10.1007/978-981-15-7557-0_45. |
| 14 | Dr. Umang Parmar | U. Parmar and D. H. Pandya, “Optimized feature selection for condition-based monitoring of cylindrical bearing using wavelet transform and ANN,” in Neural Networks, Machine Learning, and Image Processing, 1st ed., Boca Raton: CRC Press, 2022, pp. 55–65. doi: 10.1201/9781003303053-6. |
| 15 | Dr. Pulkit Kumar | P. Kumar, A. K. Parwani, and M. M. Rashidi, “Mitigation of NOx and CO2 from diesel engine with EGR and carbon capture unit,” J Therm Anal Calorim, vol. 147, no. 16, pp. 8791–8802, Aug. 2022, doi: 10.1007/s10973-021-11170-x. |
| 16 | Dr. Pulkit Kumar | P. Kumar, D. K. Pandey, A. K. Parwani, and D. K. Singh, “A comprehensive multidisciplinary investigation on CO2 capture from diesel engine,” Environ Sci Pollut Res, vol. 29, no. 18, pp. 26409–26424, Apr. 2022, doi: 10.1007/s11356-021-17812-9. |
| 17 | Dr. Pulkit Kumar | P. Kumar, A. K. Parwani, D. K. Gupta, and V. Vitankar, “Transient Cold Flow Simulation of Fast-Fluidized Bed Air Reactor with Hematite as an Oxygen Carrier for Chemical Looping Combustion,” Applied Sciences, vol. 11, no. 5, p. 2288, Mar. 2021, doi: 10.3390/app11052288. |
| 18 | Dr. Pulkit Kumar | P. Kumar, V. Rathod, and A. K. Parwani, “Experimental investigation on performance of absorbents for carbon dioxide capture from diesel engine exhaust,” Env Prog and Sustain Energy, vol. 40, no. 5, p. e13651, Sep. 2021, doi: 10.1002/ep.13651. |
| 19 | Dr. Pulkit Kumar | P. Kumar, A. K. Parwani, and V. Vitankar, “Multiphase Computational Fluid Dynamics Simulation of Air and Fuel Reactors of Chemical Looping Combustion,” Heat Transfer Engineering, vol. 44, no. 7, pp. 675–687, Apr. 2023, doi: 10.1080/01457632.2022.2079052. |
| 20 | Dr. Mit Patel | Mit Patel, Vinay Khatod, Akash Patel, Nitesh Radadiya, Rajnikant Patel, "Topology Optimization of Spiral Bevel Gear for Differential", International Journal of Innovative Technology and Exploring Engineering, Volume 9, Issue 3, January 2020 |
| 21 | Dr. Mit Patel | M. Patel, C. Patel, and H. Panchal, “Performance analysis of conventional triple basin solar still with evacuated heat pipes, corrugated sheets and storage materials,” Groundwater for Sustainable Development, vol. 11, p. 100387, Oct. 2020, doi: 10.1016/j.gsd.2020.100387. |
| 22 | Dr. Mit Patel | Mit Patel, “Impact on Performance and Emission Analysis of Waste Cooking Derived Biodiesel Considering Compression Ratio, Blend Ratio, Injection Pressure and Load on Single Cylinder VCR Engine with Comparison of RSM and MLR Model,” JST, vol. 5, no. 3, pp. 25–40, Apr. 2020, doi: 10.46243/jst.2020.v5.i3.pp25-40. |
| 23 | Dr. Mit Patel | Mit Patel, “Impact of 3D Printing on Automotive Parts,” JST, vol. 5, no. 3, pp. 79–84, May 2020, doi: 10.46243/jst.2020.v5.i3.pp79-84 |
| 24 | Dr. Mit Patel | Mit Patel, “Parametric Optimization of Brake Power and Specific Fuel Consumption on A Single Cylinder VCR Engine By Taguchi Method Using Jatropha Biodiesel Derived From Jatropha Curcas Oil Conducting Experiments As Per IS 10000 Approach,” JST, vol. 5, no. 3, pp. 62–71, May 2020, doi: 10.46243/jst.2020.v5.i3.pp62-71. |
| 25 | Dr. Mit Patel | Mit Patel, “Automobile Waste Heat Recovery System Using Thermoelectric Generator,” JST, vol. 5, no. 3, pp. 58–61, May 2020, doi: 10.46243/jst.2020.v5.i3.pp58-61. |
| 26 | Dr. Mit Patel | Mit Patel, Dr. Chetankumar Patel, Dr. Hitesh Panchal, "Different Techniques Used to Increase the Productivity of Active Solar Desalination System: A Review", Proceedings of International Conference on Recent Advances in Renewable Energy Sources (RARES 2021) |
| 27 | Dr. Mit Patel | Mit Patel, Dr. Chetankumar Patel, Dr. Hitesh Panchal, "Experimental analysis of triple basin solar still with and without use of Aluminium heat pipes", Proceedings of 2nd Virtual International Conference on Advanced Technologies and Research in Mechanical Engineering, VICATRME’22 |
| 28 | Mr. Dhrupal Kotadiya | N. Kumar, D. Kotadiya, V. J. Badheka, and V. S. Gadakh, “Effect of Process Parameters on Tensile Strength in FSW of Aluminium and Stainless Steel,” in Advances in Manufacturing Processes, H. K. Dave and D. Nedelcu, Eds., Singapore: Springer Singapore, 2021, pp. 239–247. doi: 10.1007/978-981-15-9117-4_18. |
| 29 | Mr. Rushil Shah | R. Shah, D. Shah, N. Panchal, K. Bhavsar, U. Parmar, and P. Bhatt, “A comparative study of kinematic analysis between conventional Theo Jansen mechanism and modified Theo Jansen mechanism developed using ABS for the development of spyder robot,” Materials Today: Proceedings, vol. 72, pp. 918–926, 2023, doi: 10.1016/j.matpr.2022.09.091. |
| 30 | Mr. Rushil Shah | R. Shah, K. Bhavsar, D. Patel, D. Shah, U. Parmar, and P. Bhatt, “Advancement and application of Theo Jansen linkages: A review,” Ranchi, India, 2023, p. 090020. doi: 10.1063/5.0169581. |
| 31 | Mr. Rushil Shah | Neel Bharadia, Smit Panchasara, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Study of Modified Jansen Linkage for Development of a Hexapod Robot", Proceedngs of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 32 | Mr. Rushil Shah | Ajay Yadav, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Optimization of 3D Printing Process Parameters using Design of Experiments for ABS Material", Proceedngs of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 33 | Mr. Rushil Shah | Smit Panchasara, Neel Bharadia, Jyotin Gajjar, Pratik Barot, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Analysis based Comparative Study and Development of Modified Theo Jansen Linkage", Proceedings of Indian Society of Theoretical and Applied Mechanics (ISTAM) 2022 |
| 34 | Mr. Rushil Shah | Rushil Shah, Dhruvin Patel, Pratik Barot, Keval Bhavsar, Umang Parmar, Pina Bhatt, "The Optimization of 3D Printing Process Parameters and Their Influence on Part Characteristic", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 35 | Mr. Rushil Shah | Rushil Shah, Keval Bhavsar, Dhruvin Patel, Devansh Shah, Umang Parmar, Pina Bhatt, "Advancement and Application of Theo Jansen Linkages: A Review", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 36 | Mr. Swapnil Vegad | Swapnil Vegad, Jaimin Panchal, Keval Bhavsar, Umang Parmar, "Identification of Faults in Ball Bearing using Maximum Overlap Discrete Wavelet Transform and Mutual Information", Proceedings of International Conference on Recent Advances in Mechanical Infrastructure 2022 |
| 37 | Mr. Swapnil Vegad | Swapnil Vegad, "Design of the Tie Bar for the 250 Tonne Injection", Proceedings in International Conference on Recent Advances in Mechanical Infrastructure 2022 |
| 38 | Mr. Swapnil Vegad | Dhruvi Shrimali, Swapnil Vegad, Keval Bhavsar and Umang Parmar, "Fault Identification for Permanent Magnet Synchronous Generators of Wind Turbines by Wavelet Signal Processing with Machine Learning Classification Algorithms", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 39 | Mr. Annadashankar Mishra | Annadasankar Mishra, Jogin Dhebar and Harshad Makwana. Performance and Emission Investigation of CI Engine using Waste Plastic Oil and Algae Oil. International Journal for Modern Trends in Science and Technology 2022, 8(07), pp. 195-201 |
| 40 | Mr. Annadashankar Mishra | Jogin U. Dhebar, Annadasankar Mishra, Harshad Makwana, "Investigation The Effect Of Sparkplug Gap On Vibration, Flame And HC Emission For Single Cylinder Engine", International Journal of Creative Research Thoughts (IJCRT), ISSN:2320-2882, Volume.11, Issue 3, pp.h483-h489, March 2023 |
| 41 | Mr. Annadashankar Mishra | Annadasankar Mishra, Jogin Dhebar, Harshad Makwana and Shyam Sharma. Evaluation of Speed and Torque in Armature Controlled DC Motor. International Journal for Modern Trends in Science and Technology 2023, 9(04), pp. 316-320 |
| 42 | Mr. Jogin Dhebar | Annadasankar Mishra, Jogin Dhebar and Harshad Makwana. Performance and Emission Investigation of CI Engine using Waste Plastic Oil and Algae Oil. International Journal for Modern Trends in Science and Technology 2022, 8(07), pp. 195-201 |
| 43 | Mr. Jogin Dhebar | Jogin U. Dhebar, Annadasankar Mishra, Harshad Makwana, "Investigation The Effect Of Sparkplug Gap On Vibration, Flame And HC Emission For Single Cylinder Engine", International Journal of Creative Research Thoughts (IJCRT), ISSN:2320-2882, Volume.11, Issue 3, pp.h483-h489, March 2023 |
| 44 | Mr. Jogin Dhebar | Annadasankar Mishra, Jogin Dhebar, Harshad Makwana and Shyam Sharma. Evaluation of Speed and Torque in Armature Controlled DC Motor. International Journal for Modern Trends in Science and Technology 2023, 9(04), pp. 316-320 |
| 45 | Mr. Keval Bhavsar | R. Shah, D. Shah, N. Panchal, K. Bhavsar, U. Parmar, and P. Bhatt, “A comparative study of kinematic analysis between conventional Theo Jansen mechanism and modified Theo Jansen mechanism developed using ABS for the development of spyder robot,” Materials Today: Proceedings, vol. 72, pp. 918–926, 2023, doi: 10.1016/j.matpr.2022.09.091. |
| 46 | Mr. Keval Bhavsar | V. Vakharia, I. E. Castelli, K. Bhavsar, and A. Solanki, “Bandgap prediction of metal halide perovskites using regression machine learning models,” Physics Letters A, vol. 422, p. 127800, Jan. 2022, doi: 10.1016/j.physleta.2021.127800. |
| 47 | Mr. Keval Bhavsar | P. Akhenia, K. Bhavsar, J. Panchal, and V. Vakharia, “Fault severity classification of ball bearing using SinGAN and deep convolutional neural network,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 236, no. 7, pp. 3864–3877, Apr. 2022, doi: 10.1177/09544062211043132. |
| 48 | Mr. Keval Bhavsar | K. Bhavsar, V. Vakharia, R. Chaudhari, J. Vora, D. Y. Pimenov, and K. Giasin, “A Comparative Study to Predict Bearing Degradation Using Discrete Wavelet Transform (DWT), Tabular Generative Adversarial Networks (TGAN) and Machine Learning Models,” Machines, vol. 10, no. 3, p. 176, Feb. 2022, doi: 10.3390/machines10030176. |
| 49 | Mr. Keval Bhavsar | R. Shah, K. Bhavsar, D. Patel, D. Shah, U. Parmar, and P. Bhatt, “Advancement and application of Theo Jansen linkages: A review,” Ranchi, India, 2023, p. 090020. doi: 10.1063/5.0169581. |
| 50 | Mr. Keval Bhavsar | Neel Bharadia, Smit Panchasara, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Study of Modified Jansen Linkage for Development of a Hexapod Robot", Proceedings of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 51 | Mr. Keval Bhavsar | Ajay Yadav, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Optimization of 3D Printing Process Parameters using Design of Experiments for ABS Material", Proceedings of International Conference on Recent Advances in Mechanical Infrastructure 2022. |
| 52 | Mr. Keval Bhavsar | Swapnil Vegad, Jaimin Panchal, Keval Bhavsar, Umang Parmar, "Identification of Faults in Ball Bearing using Maximum Overlap Discrete Wavelet Transform and Mutual Information", Proceedings of International Conference on Recent Advances in Mechanical Infrastructure 2022 |
| 53 | Mr. Keval Bhavsar | Smit Panchasara, Neel Bharadia, Jyotin Gajjar, Pratik Barot, Keval Bhavsar, Rushil Shah, Umang Parmar, Pina Bhatt, "Kinematic Analysis based Comparative Study and Development of Modified Theo Jansen Linkage", Proceedings of Indian Society of Theoretical and Applied Mechanics (ISTAM) 2022 |
| 54 | Mr. Keval Bhavsar | Rushil Shah, Dhruvin Patel, Pratik Barot, Keval Bhavsar, Umang Parmar, Pina Bhatt, "The Optimization of 3D Printing Process Parameters and Their Influence on Part Characteristic", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 55 | Mr. Keval Bhavsar | Rushil Shah, Keval Bhavsar, Dhruvin Patel, Devansh Shah, Umang Parmar, Pina Bhatt, "Advancement and Application of Theo Jansen Linkages: A Review", Proceedings of Parul University International Conference on Engineering and Technology 2022 |
| 56 | Mr. Keval Bhavsar | Pranav Darji, Keval Bhavsar, Dharmik Gohel, Jitendra Modi, Umang Parmar, "Comparison of Kinematic Analysis of Robot Based on Conventional Theo Jansen Mechanism and Modified Theo Jansen Mechanism Made of Mild Steel", Proceedings of International Conference on Innovations in Mechanical Engineering (ICIME 2021) |
| 57 | Mr. Keval Bhavsar | Keval Bhavsar, Pranav Darji, Dharmik Gohel, Jitendra Modi, Umang Parmar, "Comparion of Kinematic Analysis of Modified Theo Jansen Mechanisam Based Robot Made of PLA and Mild Steel", Proceedings of GTUICON 2019 |
| 58 | Mr. Keval Bhavsar | Mit Shah, Pina Bhatt, Keval Bhavsar and Umang Parmar, "Identification of Faults for Centrifugal Pump using Wavelet Analysis with Machine Learning Classifiers", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 59 | Mr. Keval Bhavsar | Rahulkumar Parmar, Yashwantkumar Parmar, Dhruvi Shrimali, Keval Bhavsar and Umang Parmar, "Drone Detection and Tracking using Electro Optics", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 60 | Mr. Keval Bhavsar | Dhruvi Shrimali, Swapnil Vegad, Keval Bhavsar and Umang Parmar, "Fault Identification for Permanent Magnet Synchronous Generators of Wind Turbines by Wavelet Signal Processing with Machine Learning Classification Algorithms", Proceedings of Parul University International Conference on Engineering and Technology 2023 |
| 61 | Mr. Keval Bhavsar | K. Bhavsar, P. Darji, D. Gohel, J. Modi, and U. Parmar, “Comparison of Kinematic Analysis of Robot Made of Conventional Theo Jansen Mechanism, Modified Theo Jansen Mechanism of PLA and Modified Theo Jansen Mechanism of Mild Steel,” in Recent Trends in Mechanical Engineering, G. S. V. L. Narasimham, A. V. Babu, S. S. Reddy, and R. Dhanasekaran, Eds., Singapore: Springer Singapore, 2021, pp. 545–559. doi: 10.1007/978-981-15-7557-0_45. |
| 62 | Mr. Keval Bhavsar | K. Bhavsar, D. Gohel, and J. Panchal, “Design and Analysis of Circular and Square Arm for an Articulated Robot,” in Recent Advances in Mechanical Infrastructure, A. K. Parwani, Pl. Ramkumar, K. Abhishek, and S. K. Yadav, Eds., Singapore: Springer Singapore, 2021, pp. 457–472. doi: 10.1007/978-981-33-4176-0_39. |
| 63 | Mr. Keval Bhavsar | K. Bhavsar and V. Vakharia, “Prediction of Remaining Useful Life (RUL) of Bearing Using Exponential Degradation Model,” in Recent Advancements in Mechanical Engineering, T. S. Sudarshan, K. M. Pandey, R. D. Misra, P. K. Patowari, and S. Bhaumik, Eds., Singapore: Springer Nature Singapore, 2023, pp. 439–447. doi: 10.1007/978-981-19-3266-3_34. |
| 64 | Mr. Keval Bhavsar | J. Panchal, K. Bhavsar, and D. Gohel, “Design and Analysis of Anti-intrusion Beams for Car Door,” in Innovations in Mechanical Engineering, G. S. V. L. Narasimham, A. V. Babu, S. S. Reddy, and R. Dhanasekaran, Eds., Singapore: Springer Nature Singapore, 2022, pp. 15–27. doi: 10.1007/978-981-16-7282-8_2. |
| 65 | Mr. Keval Bhavsar | D. Gohel, K. Bhavsar, and J. Panchal, “Structural Analysis and Topology Optimization of Base of Revolving Chair,” in Innovations in Mechanical Engineering, G. S. V. L. Narasimham, A. V. Babu, S. S. Reddy, and R. Dhanasekaran, Eds., Singapore: Springer Nature Singapore, 2022, pp. 43–49. doi: 10.1007/978-981-16-7282-8_4. |
| 66 | Dr. Pina Bhatt | "Thermal Spray Techniques for Developing a Carbide Coating", International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075,Volume-8, Issue-12S |
| 67 | Dr. Pina Bhatt | "An Application of Jacobian Matrix in Kinematic of Multi-loop Spatial Mechanism", International Journal of Innovative Technology and Exploring Engineering ISSN: 2278-3075,Volume-8, Issue-12S |
| 68 | Dr. Pina Bhatt | "Design and dynamic balancing of multi-loop spatial mechanism-A Review", International Journal for Research in Engineering Application & Management (IJREAM) ISSN : 2454-9150 |
| 69 | Dr. Pina Bhatt | "Potential applications of advanced nano-composite materials for space payload", Australian journal of mechanical engineering, Taylor & Francis, 1448-4846: https://doi.org/10.1080/14484846.2020.1733176 |
| 70 | Dr. Pina Bhatt | "New horizons of Space Qualification of Single-Walled Carbon Nano Tubes-Carbon Fibre Reinforced Polymer", Composite Journal of Physics: Conference Series:IOP Publications:doi:10.1088/1742-6596/1854/1/012001 |
| 71 | Dr. Pina Bhatt | "Characterization of Tailored Multi‑walled Carbon Nanotubes Based Composite for Geo‑Space Payload Components", Journal of Electronic Materials: https://doi.org/10.1007/s11664-021-08978-6 |